Filler application - Aluminium

VOC 45
TST 61 (1).png

1. Masking

  • Mask the repair area
  • make sure to mask with soft edges, hard edges will leave marks in basecoat.
  • Clean with 70-10
TST 61 (8).png

2. Mixing ratio

TST 61 (2).png

3. Primer application

  • Spray gun HVLP 1.3, 2 bar
  • Apply 1 coat over the bare aluminium.

 

Application:

 

Flash off:

  • 10 min at 20°
TST 61 (10).png

4. Product preparation

  • Prepare undercoat accoridng to color 20-24
  • To obtain different colors, fillers can be mixed
TST 61 (9).png

5. Mixing ratio

TST 61 (3).png

6. Application of filler

  • Spray 2 wet coats on repair
  • Stay with second coat in the patern of first coat as shown on the picture

Dry

  • 8 min short wave
  • 3 hours at 20°C
TST 61 (4).png

7. Sanding guide

  • Use of sanding guide, highligts surface imperfections and possible sand scratsches prior to finish with abrasives.
TST 61 (5).png

8. Sanding steps

  • Fine sand area with orbit machine P 320
  • Surround area with P 400/ P 500
TST 61 (6).png

9. Sanding steps

  • Fine sand area with 3mm orbit machine and P 320
  • finish with P 400/ P 500
  • Blend in area P1000/2000
TST 61 (7).png

10. Cleaning:

Repair Steps

Start working with baslac today. It just makes sense.

Let’s chat

Get in touch with your local baslac dealer now and start working smarter.

Find a dealer near you