Putty application - metal - CV 30

30CV
TST 13 (1).png

1. Preparation for putty

  • Clean carefully with  70-10
  • Sand the damage with P150
  • For small repairs, keep the sanding area as small as possible
TST 13 (2).png

2. Mixing ratio of putty

  • 12-20 Putty 100%
  • 56-20 Hardener 3% by weight
  • Mix until uniform color

Dry properties

  • 20 min at 20°C
  • 4 min short wave
TST 13 (4).png

3. Sanding guide

  • Use of sanding guide, highlights surface imperfections and possible sand scratches prior to finish with abrasives
TST 13 (5).png

4. Sanding steps

  • Hand block the putty first with P 150/240
TST 13 (3).png

5. Sanding steps

  • Fine sand the area with orbit machine: P 240
  • Surround area with P 320
TST 13 (6).png

6. Cleaning

  • Clean carefully with 70-10
  • Use wipe on, wipe off method (2 cloths)
Repair Steps

Start working with baslac today. It just makes sense.

Let’s chat

Get in touch with your local baslac dealer now and start working smarter.

Find a dealer near you