Damaged plastic repair
non VOC 35
1. Cleaning steps
- Clean plastic bumper with 70-10 silicon remover
2. Sanding steps
- Sand the damage area with P150/ P 240
3. Sanding steps
- Fine sand the repair area with P320/400
4. Cleaning
- Clean with 70-20
- Use wipe on, wipe off method
- Tack cloth cleaning
5. Adhesion primer application
- Shake the 21-20 spray can vigorously
- Apply 2 coats on the bare plastic
- Flash off 15 min at 20°C
6. Mixing of Filler
- Fast solution is combination 50-05 with 60-05
- In case of flexible plastic mix:
- 4 parts 20- with
- 1 part 80-10 before adding hardener and reducer
- For other combinations, consult temperature chart
- Temperature chart
7. Filler application
- Spray nozzle 1.6, 2.0 bar
- Apply 2 coats over repaired area with intermediate 3 min flash off
Dry filler
With 50-05/60-05
- 60 min 20° C
- 10 min 60° C
- 4 min IRT
- For more drying option, see temperature chart.
- See temperature chart