Damaged plastic repair - CV 30
30CV
1. Cleaning steps
- Clean plastic bumper with 70-10 silicon remover
2. Sanding steps
- Sand the damage area with P150/ P 240
3. Sanding steps
- Fine sand the repair area with P320/ P400
4. Cleaning
- Clean with 70-20
- Use wipe on, wipe off method
- Tack cloth cleaning
5. Adhesion primer application
- Shake the 21-20 spray can vigorously
- Apply 2 coats on the bare plastic
- Flash off 15 min at 20°C
6. Mixing of Filler
- In case of flexible plastic mix:
- 4 parts 20- with
- 1 part 80-10 before adding hardener and reducer
7. Filler application
- Spray nozzle 1.6, 2.0 bar
- Apply 2 coats over repaired area with intermediate 3 min flash off
8. Dry filler
- 3h 20° C
- 30 min 60° C
- Drying times can be accelerated with 60-05 see temperature chart