##  <a> </a> 

#  New plastic bumper repair 

 

 

 

 

  Non VOC 35

  

 

      ![TST 14 (6).png](https://www.baslac.com/data/sites/baslac/files/styles/ars__ratio_43__531x398/public/2024-03/TST%2014%20%286%29.png.webp?itok=gUdmvqkn "TST 14 (6).png")  



 

 1. Preparation steps

Heat up the Plastic for 1 hour at 60°c prior to cleaning.

 

 

 

      ![TST 14 (1).png](https://www.baslac.com/data/sites/baslac/files/styles/ars__ratio_43__531x398/public/2024-03/TST%2014%20%281%29.png.webp?itok=yzvvJdar "TST 14 (1).png")  



 

 2. Cleaning

- Clean the bumper with [70-20](https://techinfo.baslac.com/en/70-20.pdf) plastic cleaner right after heating.
- 
- Tag cloth the bumper.

 

 

 

      ![TST 14 (7).png](https://www.baslac.com/data/sites/baslac/files/styles/ars__ratio_43__531x398/public/2024-03/TST%2014%20%287%29.png.webp?itok=LXSwi-rE "TST 14 (7).png")  



 

 3. Plastic primer application

- Spray gun 1.3
- Pressure 2.0 bar
- Apply 1 to 2 coats [21-10](https://techinfo.baslac.com/en/21-10.pdf) on plastic bumper.

 

 

 

      ![TST 14 (3).png](https://www.baslac.com/data/sites/baslac/files/styles/ars__ratio_43__531x398/public/2024-03/TST%2014%20%283%29.png.webp?itok=s_snkg4x "TST 14 (3).png")  



 

 4. Plastic primer application

- Flash off the primer 15 min at 20°C

 

 

 

      ![TST 14 (5).png](https://www.baslac.com/data/sites/baslac/files/styles/ars__ratio_43__531x398/public/2024-03/TST%2014%20%285%29.png.webp?itok=QqXy7XZt "TST 14 (5).png")  



 

 5. Mixing Primerfiller

- 20-35/95 3
- 50- 1
- 60- 1

- Temperature chart

 

 

 

      ![TST 14 (2).png](https://www.baslac.com/data/sites/baslac/files/styles/ars__ratio_43__531x398/public/2024-03/TST%2014%20%282%29.png.webp?itok=BpXJkSyf "TST 14 (2).png")  



 

 6. Primerfiller application

- Spraygun 1.3, pressure 2.0 bar
- Apply 1 coat.

 

 

 

      ![TST 14 (4).png](https://www.baslac.com/data/sites/baslac/files/styles/ars__ratio_43__531x398/public/2024-03/TST%2014%20%284%29.png.webp?itok=Cx1TsxR3 "TST 14 (4).png")  



 

 7. Flash off

- Flash off bumper 20 min at 20°C
- Bumper is ready for topcoat/basecoat.

 

 

 

 

 

 

 

 



 

 Start working with baslac today. It just makes sense.

 

  [Contact us

  ](/en-emea/contact-us "Contact us")  

 

 

 Get in touch with your local baslac dealer now and start working smarter.

 

  [Find a dealer near you

  ](/en-emea/dealers "Find a dealer near you")