Primer / Filler application - metal/aluminium - CV 30

• Clean with 70-10
• Wipe on, wipe off (2 cloths)

• For corrosion protection on large bare metal, 27-10 is recommended

Application:

• 1 coat (see 27-10 TDS)

Flash off:

• 10 min at 20°C

• 27-10 Washprimer 100%
• 57-30 Hardener 50%
• 60- Reducer 30%
•  
• Basecoat 45- cannot be applied directly over 27-10, must be covered with 20- primerfiller

• Prepare undercoat according to the color 20-24
• To obtain different grey shades, fillers can be mixed

• 20-24/34/94   4                          
• 50-15             1
• 60-10/20/30   1

• Spray 2 coats on repair to obtain 50 to 70 microns
• Flash of 3 min between both layers
• Stay with second coat in the pattern of the first coat

Dry:

• 8 min short wave
• 3 hours at 20°C
• 30 min at 60°C

• Fine sand area with 3mm orbit machine and P 320
• finish with P 400

• Clean carefully with 70-10
• Use wipe on, wipe off method (2 cloths)