Blend into repaired panel - 45 LVOC

VOC 45 Line
TST 24 (1).png

1. Cleaning

  • Clean carefully with cleaner 70-45
  • Use wipe on, wipe off method
TST 24 (4).png

2. Preparation steps

  • Tack cloth the area to be painted
TST 24 (3).png

3. Mixing ratio of basecoat:

TST 24 (5).png

4. Basecoat

  • Spray gun HVLP 1.4,  pressure 11.6 - 21.8 psi (0.8 - 1.5 bar)
  • Cover filler patch with reduced pressure until covered
  • Keep the patch as small as possible
  • Flash off until matte
TST 24 (6).png

5. Mixing blend in clear:

  • 45-W10                     100%
  • 45-R45 Diluter            70%
TST 24 (2).png

6. Blend in clear

  • Spray gun HVLP 1.4 pressure 29.0 psi (2.0 bar)
  • Spray 1 wet coat until 4 in (10 cm) of edges
  • No flash off
TST 24 (9).png

7. Mixing blend in clear and basecoat

  • Mix RFU blend in clear and RFU basecoat 1:1
TST 24 (7).png

8. Blend in of base coat

  • Blend in the filler patch into wet blend-in clear
  • Spray gun HVLP 1.4 pressure 11.6 - 21.8 psi (0.8 - 1.5 bar)
  • Flash off
TST 24 (8).png

9. Mist coat

  • Apply a mist coat over the repaired area
  • Spray gun distance is 12 in (30 cm)
  • Flash off
  • Panel is now ready for clearcoat
Repair Steps

Start working with baslac today. It just makes sense.

Contact us

Get in touch with your local baslac dealer now and start working smarter.

Find a dealer near you