3 Stage blend in adjacent panel 35 Line

35 Line
TST 18 (6).png

1. Cleaning step

  • Clean carefully with 70U-10
  • Use wipe on, wipe off method
TST 18 (1).png

2. Masking

  • To avoid overspray on the door, we recommend to cover the door for the first step
TST 18 (11).png

3. Preparation steps

  • Tack cloth clean the area to be painted
35 Basecoat 60U Reducer

4. Mixing of basecoat step 1:

  • 35- Basecoat        100%
  • 60U- Reducer         50%
  •  
TST 18 (10).png

5. Basecoat application step 1

  • Spray gun HVLP 1.3, 29.0 psi (2.0 bar)
  • Apply first coat
  • Flash off
  • Apply second coat
  • Flash off
TST 18 (7).png

6. Demask the door

  • Demask the door carefully
TST 18 (2).png

7. Clean the door

  • Clean the door prior to blend-in application
  • Tack cloth clean the door
TST 18 (5).png

8. Blend in basecoat - step 1:

  • 35- Basecoat         100%
  • 60- Diluter                50%
  •  
  • Spray gun HVLP 1.3
  • Reduce pressure between 11.6 - 21.8 psi (0.8 - 1.5 bar)
  • Blend the fender into the door
  • Flash off
TST 18 (12).png

9. Tack cloth door:

  • Tack cloth the overspray on surrounding area
35 Basecoat 60U Reducer

10. Mixing basecoat step 2:

  • 35- Basecoat        100%
  • 60U- Diluter              50%
TST 18 (13).png

11. Application of pearl effect step 2:

  • Spray gun 1.3 HVLP, 29.0 psi (2.0 bar)
  • 2 coats with intermediate flash off
  • Then blend in the door until invisible repair
  • Flash off until matte
  • We recommend to make a spray-out prior to paint, for color match control
TST 18 (8).png

12. Mist coat

  • Apply mist coat over the repaired area
  • Spray gun distance approx. 12 in (30 cm) from object
  • Ready for clearcoat application

Comience a trabajar con baslac hoy mismo. Simplemente tiene sentido.

Contáctenos

Póngase en contacto con su distribuidor local de baslac ahora y comience a trabajar de manera más inteligente.

Encuentre un distribuidor cerca de usted