Filler / Putty application - metal - 35

VOC 35 Line
TST 27 (1).png

1. Preparation for body filler / putty

  • Clean carefully with  70U-15
  • Sand the damage with P150
  • For small repairs, keep the sanding area as small as possible
TST 27 (2).png

2. Mixing ratio of filler / putty:

  • Follow the putty / body filler manufacturer recommendations for mixing, application, and drying.
TST 27 (4).png

3. Sanding guide

  • Use of sanding guide, highlights surface imperfections and possible sand scratches prior to finish with abrasives
putty_04

4. Sanding steps

  • Hand block the filler / putty first with P 180 first.
TST 27 (3).png

5. Sanding steps

  • Fine sand the area with orbit machine: P 240
  • Surround area with P 320
Cleaning 70U-10 Degreaser

6. Cleaning

  • Clean carefully with 70U-10
  • Use wipe on, wipe off method (2 cloths)

Comience a trabajar con baslac hoy mismo. Simplemente tiene sentido.

Contáctenos

Póngase en contacto con su distribuidor local de baslac ahora y comience a trabajar de manera más inteligente.

Encuentre un distribuidor cerca de usted