Filler / Putty application - Aluminum

35 Line
TST 60 (1).png

1. Preparation for filler / putty

  • Clean carefully with  70U-15
  • Sand the damage with P150
  • For small repairs, keep the sanding area as small as possible
TST 60 (3).png

2. Mixing ratio of filler / putty

  • Follow the body filler / putty manufacturer recommendation for mixing, application, and drying.
TST 60 (4).png

3. Sanding steps

  • Hand block the body filler / putty with P180 first
TST 60 (5).png

4. Sanding steps

  • Fine sand the area with orbit machine: P240
  • Suround area with P320
TST 60 (2).png

5. Cleaning steps

  • Clean carefully with 70U-10 before applying undercoat
Repair Steps

Comience a trabajar con baslac hoy mismo. Simplemente tiene sentido.

Contáctenos

Póngase en contacto con su distribuidor local de baslac ahora y comience a trabajar de manera más inteligente.

Encuentre un distribuidor cerca de usted