Orange peel effect

Poor surface texture of the paint similar to the surface texture of an orange skin

Paint Defects
TST 29.png

Causes

  • Incorrect spraying pressure (too low)
  • Paint coats too THIN
  • Viscosity too high
  • Hardener and thinner not matched to the spraying temperature
  • Wrong spraygun set-up
  • Sanding of substrate insufficient
paint defect - prevention.png

Prevention

  • Use the spraying techniques appropriate for the paint materials
    • Correct pressure
    • Correct spray gun
    • Correct nozzle set-up
  • Use correct application method
  • Match the hardener and thinner to the spraying temperature
  • Adjust the spray viscosity as specified in the technical data sheets
paint defects - repair.png

How to repair

  • When the affected area is small, sand with P1200 and polish with polishing paste and fine polishing paste
  • When large areas are affected, sand down the surface until level, then repaint

Comience a trabajar con baslac hoy mismo. Simplemente tiene sentido.

Contáctenos

Póngase en contacto con su distribuidor local de baslac ahora y comience a trabajar de manera más inteligente.

Encuentre un distribuidor cerca de usted