Wet-on-wet application aluminum - 35

35 Line
TST 57 (1).png

1. Cleaning process

  • Check the panel for transportation damage
  • Clean with 70U-15 70U-10
  • Wipe on wipe off (2 cloths)
TST 57 (2).png

2. Preparation

  • In case of transportation damage, repair the damage
  • Scratches with P400
  • Clean with fine hand pad abrasive (similar to grey scotch brite) in combination with 70U-10 cleaner
  • In case of larger damage, follow the damage panel process
23U-10 Aerosol

3. Preperation of panel

  • Apply 2-3 full coats 23U-10 Etch Aerosol to all bare aluminum, with 2-5 min flash between coats.
  • Dry 15-20 min at 68°F (20°C) before sealer application.
product_preparation_20U

4. Primer preparation

  • Prepare undercoat according to color 20U-23 / -24 / -25
  • To obtain different grey shades, fillers can be mixed
mixing-ratio-20U-50U-60U

5. Mixing ratio

  • 20U-23 / -24 / -25   3
  • 50U-                       1
  • 60U-                       2
  •  
  •  
  •  
  •  
  •  
  • Mix accordingly to temperature chart
TST 57 (3).png

6. Application

  • Tag cloth the panel carefully
TST 57 (4).png

7. Application

  • Spray gun: RP 1.3 / 29.0 psi (2.0 bar)
  • Apply 1 wet coat on panel
TST 57 (5).png

8. Flash off

  • 30 min at 68°F (20°C)
  • Panel is ready for baslac® basecoat, after flash off

Comience a trabajar con baslac hoy mismo. Simplemente tiene sentido.

Contáctenos

Póngase en contacto con su distribuidor local de baslac ahora y comience a trabajar de manera más inteligente.

Encuentre un distribuidor cerca de usted