e-finder Perform Measurement - non-VOC 35
e-finder
1. Device positioning
- Always measure the area's next to the repair
- Red area is repair.
- Blue area's are the prefered measurement area's.
2. Device positioning
- Position the device on the clean area's with led light green and keep stable.
3. Measurement result
- Repeat the measurement until you get the green V
- V means correct measurement.
4. Measurement result
- X means incorrect measurement, repeat and keep stable.
5. Connect device
- Connect device to computer/scale
6. Upload of measurement
- Open e-finder on formula finder
7. Upload of measurement
- Click to Syncronize device to upload measurement.
8. Upload of measurement
- Select the color.
- First color, is last measurement.
9. Upload of measurement
- Upload the selected color by clicking on "transfer selected" button
10. Upload of measurement
- If you would like to keep the measurement after download, click no.
- If not, click yes.
- We recommend deleting of measurements in order to keep device as fast as possible.
11. Upload of measurement
- Select Search criteria
12. Upload measurement
- Fill in the correct base line
- Fill in car manufacture
- Fill color code (not requiered)
13. Formula search
- Select apply
14. Formula search
- Now the match for your color with Spectro is found(91 %) .
- Select if you would like to mix the formula.
15. Formula search
- At the same time, the software propose you the adjusted formula (97 %)
- Select if you would like to mix the adjusted formula
16. Formula search
- Formula is now ready to mix.