Primer / Filler application - metal - Non VOC

non VOC 35
TST 59 (1).png

1. Masking

  • Mask the repair area
  • make sure to mask with soft edges, hard edges will leave marks in basecoat
  • Clean with 70-10
TST 59 (5).png

2. Primer application

  • For corrosion protection on large bare metal, 27-10 is recommended
TST 59 (9).png

3. Mixing ratio:

  • 27-10 Washprimer 100%
  • 57-10 Hardener 50%
  • 60- Reducer 30%

Application: 

  • 1 coat (see 27-10 TDS)

Flash off: 

  • 10 min at 20°C
TST 59 (10).png

4. Filler process

  • Prepare undercoat according to the car color 20-24
  • To obtain different grey shades, fillers can be mixed
TST 59 (4).png

5. Mixing ratio:

TST 59 (6).png

6. Application of filler:

  • Spray 2 coats on repair to obtain 50 to 70 microns
  • Flash of 5 min between both layers
  • Stay with second coat in the pattern of the first coat

Dry Properties:

  • 8 min short wave
  • or 3 hours at 20°C
  • or 30 min at 60°C
TST 59 (2).png

7. Sanding guide

  • Use of sanding guide, highlight surface imperfections and possible sand scratches prior to finish with abrasives
TST 59 (7).png

8. Sanding steps

  • Hand block with P320 / P400 for perfect levelling prior to machine sanding
TST 59 (8).png

9. Sanding steps

  • Fine sand area with 3mm orbit machine and P 320
  • finish with P 400/ P 500
  • Blend in area P1000/2000
TST 59 (3).png

10. Cleaning

  • Clean carefully with 70-10
  • Use wipe on, wipe off method (2 cloths)
Repair Steps

Rozpocznij pracę z bazakiem już dziś. To po prostu ma sens.

Contact us

Skontaktuj się z lokalnym sprzedawcą baslac już teraz i zacznij pracować mądrzej.

Znajdź najbliższego dealera