橘皮 Poor surface texture of the paint similar to the surface texture of an orange skin 漆膜表面纹理较差,类似橘皮表面纹理。 油漆缺陷 成因 Incorrect spraying pressure (too low) 喷涂压力不正确(压力过小) Paint coats too THIN 漆膜喷得过薄 Viscosity too high 粘度过高 Hardener and thinner not matched to the spraying temperature 固化剂和稀释剂未根据喷涂温度进行匹配 Wrong spraygun set-up 喷枪设置不正确 Sanding of substrate insufficient 底材打磨不充分 预防 Use the spraying techniques appropriate for the paint materials 使用适合油漆材料的喷涂技术 Correct pressure 正确的喷涂压力 Correct spray gun 正确的喷枪 Correct nozzle set-up 正确的喷嘴设置 Use correct application method 使用正确的施工方法 Match the hardener and thinner to the spraying temperature 根据喷涂温度搭配固化剂和稀释剂 Adjust the spray viscosity as specified in the technical data sheets 遵照TDS的规定调整喷涂粘度 如何修复 When the affected area is small, sand with P1200 and polish with polishing paste and fine polishing paste 当受影响区域较小时,使用 P1200 砂纸打磨,然后使用抛光膏和精细抛光膏进行抛光。 When large areas are affected, sand down the surface until level, then repaint 当受影响区域较大时,打磨表面直至平整,然后重新喷涂。 Repair Steps 底色漆/面漆 清漆 中涂/填充 原子灰 打磨中涂 湿碰湿中涂 立即开始使用百事利。这是有道理的。 让我们聊聊 立即联系您当地的百事利经销商,开始更智能地工作。 查找您附近的经销商