相邻板件过渡
Non VOC 35 35系列非VOC
1. Cleaning step 清洁步骤
- Clean carefully with cleaner 70-10 使用70-10清洁剂仔细清洁
- Use wipe on wipe off method 使用一湿一干的方法进行清洁
2. Preparation steps
- Tag cloth the area to be painted 用粘尘布擦拭待喷涂区域
3. Mixing ratio 调配比例
- 35- Basecoat 35系列底色漆 100%
- 60-20/30/40 Diluter 稀释剂 50%
- temperature chart 温度表
4. Application first coat 第一层施工
- Spray gun HVLP or RP 1.3 pressure 2.0 bar / HVLP或RP喷枪1.3口径，气压2.0巴
- Spray 1 coat on the wing 叶子板上喷涂一层
- Flash off 闪干
5. Cleaning 清洁
- Tag cloth the overspray on the door 使用粘尘布对门板进行清洁
6. Application method second coat
- Spray gun HVLP or RP 1.3 pressure 2.0 bar HVLP或RP喷枪1.3口径，气压2.0巴
- Spray second coat on wing 喷涂第二层
- No flash off 无需闪干
7. Application method 施工方法
- Reduce pressure to 0.8 to max 1.5 bar and blend in the door 将喷枪压力降低至 0.8至最高1.5 巴，并在车门上进行过渡喷涂。
- Flash off 闪干
8. Mist coat 薄雾层
- Apply mist coat over repaired area 喷涂一薄雾层以覆盖修补区域
- Spray gun distance approx. 30 cm from object 枪距约30厘米
- Flash off 闪干
- Ready for clear coat 准备进行清漆施工
Repair Steps